I divide the disk into 4 levels, is based on research and my own experience over the handling damage to the hard disk.
Level 1
Damage that occurred at this level usually caused Bad sectors. To handle this there are several ways and variations of the experiment, adjusted to the hard drive brand and the number of bad sectors.
For initial handler can use the command FORMAT C: / C (adjust the drive which will be formatted). / C used to which cluster mebersihkan damaged.
Step two, if not managed can use the Disk Manager program from each hard drive manufacturer.
If not successful you also can use the software HDDREG, please download on the internet program.
If not successful try the Low Level Format or Zero Files.
If you still can not, you can do cutting damaged sector of hard disks which, by dividing it and not using the sector has been corrupted.
Level 1
Damage that occurred at this level usually caused Bad sectors. To handle this there are several ways and variations of the experiment, adjusted to the hard drive brand and the number of bad sectors.
For initial handler can use the command FORMAT C: / C (adjust the drive which will be formatted). / C used to which cluster mebersihkan damaged.
Step two, if not managed can use the Disk Manager program from each hard drive manufacturer.
If not successful you also can use the software HDDREG, please download on the internet program.
If not successful try the Low Level Format or Zero Files.
If you still can not, you can do cutting damaged sector of hard disks which, by dividing it and not using the sector has been corrupted.
Level 2
The damage at level 2 is Losing Hard Disk Partitioning and Data. This could be caused by a virus or error using utility programs. One is to be considered in hard drive partition to restore the lost, the hard drive capacity and type of file system. Partition with a FAT File System is more easily restored than NTFS or Linux File System.
Check the first hard disk partition by using FDISK or Disk Manager
To restore it can use software such as Acronis Disk Director, Handy Recovery, Stellar Phoniex etc.
Level 3
Erosive damage to the hard drive detected in BIOS but can not be used, always an error message appears when the computer do the POST. This is usually caused FIRMWARE troubled from the hard disk. For these symptoms are more common in Maxtor brand hard drive series with the names of Gods. To fix it you can download the firmware program from the hard drive brand website.
Level 4
The damage that causes the hard drive is not correctly detected by BIOS and can not be used again. This is the hardest level in my opinion. Due to the repairs we need a little tweaking tooling electronic devices and components inside.Menganggulangi hard drive is not detected by the BIOS in many ways.
- Check the electrical current which flows into the hard drive
- Replace the IC on the mainboard Harddisk
- Open the Cover Cover your hard disk and check the position of Head hard drive
- How extreme yg yg damaged hard disk drive can dikanibal with the others who keruskan different, can be a way
maiboardnya replace or take her IC.
Hopefully this could be an additional reference for you who want to try to repair the hard drive. Good luck.....
Alternative tool to overcome the bad sector
Utility Use
You can use a device that could eliminate the logical bad sectors and fix them. Just so you know, bad sector is divided into two: logic and physic. Devices that make the hard disk back to work with "remove" his bad sectors.
Hard disks are usually bundled with a software for management functions as well asrepairs. For example, Maxtor and Quantum have MaxBlast, Samsung hasClearHDD, Seagate had a Seagate Format, Western Digital Old DLG Diagnosticgot, and Fujitsu have a FJ-IDE Drive Initializer Utility.
SpinRite supports FAT, NTFS, Linux, Novell, drives with multiple operating systemsas well as an unformatted hard disk. How to use it easy. Simply follow these steps.
Create a diskette or CD that can boot. Him in the SpinRite. Click [Create BootDiskette], [Create ISO or Image File], or [Install SpinRite on Drive]. Let easy, chooseto make a bootable CD. Just so you know, SpinRite only runs in DOS mode.
After the image file is finished, use CD burning software, like Nero Burning ROM,to make a CD. Restart the computer and boot with the CD which had just made.
SpinRite has 5 option or level. Level that most likely you need is a level 2 or level4. Actions at level 2 is the return of data, while level 4 is the maintenance of drivesand analysis. Just select the action you want to do.
Whatever level you choose, you will be prompted to select the drive or partitionyou want to check or repair. After that, look at or change the options for how SpinRitecheck your hard disk. If so, continue with the next step, namely to test the performance of the drive.
Another Tool:
- Easeus Partition Manager . This free software other than beneficial to create / edit the disk partition (PartitionMagic-like appearance), can also be used to remove bad sectors.
- HDD Regenerator 2011. HDD Regenerator repairs bad sectors using an unique hardware independent technology developed by Dmitriy Primochenko. It supports many types of hard drives and repairs damage that even low-level disk formatting cannot repair. As a result, previously unreadable information is restored. Because of the way the repair is made, the existing information on the disk drive will not be affected
- Flobo Hard Disk Repair v1.0 is bad sector repair tool, test Speddy check the stabilitycontroller. technology that can monitor the status of the state of the hard disk drives,prevents data loss and predict drive
Tidak ada komentar:
Posting Komentar